Table of Contents
You may have the latest 4K, curved screen TV, but it’s of little help if you can’t get good signal in your home. Surprisingly, both cheap and expensive TVs can be affected by signals. Don’t upgrade your small digital TV yet just. Find out if you can fix the problem below before you spend more money on a new model.
Adjust the Antenna
Connecting your TV antenna cable is easy in almost every modern TV. Simply check for the antenna port at the back of your TV and insert the right cable. If you are past that step, consider adjusting the antenna position.
Ever since cell phones became accessible to everybody, TV signals were affected a lot. Your TV provider broadcasts signals in the air, connecting with each antenna in the country. But within the same environment are radio and cell phone frequencies that affect the quality of your connections.
Getting peak-quality TV signal may require a little bit of tweaking the antenna. Move the antenna by a few degrees as you observe the improvements on your TV. If your television is set to search channels automatically, you should start to see more channels being detected. For best results, place your antenna near a window. If you install the antenna outside your house, the better the signals you will get.
If nothing improves no matter how many times you tweak the antenna, you probably live far away from transmitters. Follow the next trick.
Use an Antenna Amplifier
Antenna amplifiers are helpful if you already receive some signal. The signal may be poor, but you at least have one. If your TV never gets a signal at all, an amplifier won’t solve the problem. A poor-quality amplifier will probably also not improve your TV’s poor signal.
A TV amplifier acts like a nozzle in a water hose. But instead of amplify water pressure, it improves the signal in a TV with poor signal connections. A good quality amplifier can help you connect most of the channels that initially didn’t connect.
If you live very far from transmitters, don’t expect an amplifier to help you connect to all TV channels. An amplifier’s job is to improve signals. But it can only do enough. Consider investing in the best TV amplifiers to turn your weak signals into solid connections.
Use Antenna Rods or Dishes
If the problem is that you live in an area with low signals, consider investing in antenna dishes. Usually, you get the dish from specific cable TV companies. They are stronger than an average antenna but may also cost you more.
Antenna rods were more common with analog televisions, but they still exist. Quality TV rods may help get better signals than cheap antenna. If your TV comes packed with the whips, don’t discard them. Given the choice between a TV rod and satellite dish, pick the latter.
As already mentioned, TV whips are past their golden age. They were once popular but have been overtaken by the bow-shaped signal antennas.
Disconnect and Scan Channels Afresh
You’ve probably tried scanning your TV channels severally before looking for a solution online. But there is a special type of scanning you should try before applying any other technique. The Federal Communications Commission calls it the double-rescan method.
Disconnect your antenna from your digital TV and from the set box. Switch the devices off and remove them from the power supplies. Wait five minutes and reconnect them. Don’t reconnect the antenna. Scan for TVs fully aware the antenna is missing.
The aim of this troubleshooting method is to erase any data earlier on stored by your digital TV. A few channels may appear, but don’t worry about them. Reconnect the antenna and scan once more. You should notice an increase in the number of channels discovered. If more channels appear but they have weak signals, an amplifier will solve the issue.
Deal with Reception Issues
There are several installments to a TV that interferes with signals you could be ignoring. A splitter is one of them. Most homes use splitters to transmit TV signals to different rooms for independent viewing. The process comes at the costs of weakening your home’s TV signals.
An RF modulator, which is common with gamers and DVD player owners, can also lower signal quality. If you really need the installments, an amplifier could help with the problem. An outdoor antenna may also improve your TV signal a little bit.
Invest in a New Antenna
Antennas are not all created equal. Some have better technologies with the ability to locate and connect to signals located miles away. Cheap antennas lose signals the moment you move to a home farther from transmitters.
If you live some miles away from transmitters, invest in an outdoor antenna. The indoor models are good if your TV already has good signals. A high-quality satellite dish can connect to transmitters located cities far away from your hometown.
Ensure you buy antenna designed for the TV box you use. Consult your cable provider because they probably offer outdoor antenna. If you don’t have room for an outdoor antenna, you can still find a quality indoor antenna. But ensure it is top-shelf and be installed close to the window.
Upgrade your TV
If nothing else works and you have a pretty old TV, upgrade it to a newer model. The new age models are packed with in-built amplifiers and have antennas that located signals from miles away. If you don’t intend to purchase a new TV, consider the alternatives.
You can watch TV online. Find out whether your TV gets signals for your favorite channels. If it does, watch more TVs online. Another option is to split costs in a satellite dish package with a neighbor. If you can’t share, purchase the cheapest satellite TV package you can afford.
The last attempt is to call a professional. Buying a new TV is never the solution for many people with weak signal problems. A technician can observe your situation and offer better assistance.